Zero Dig Trenchless Sewer Pipe Repair
Discover the difference with the Perma-Lateral™ system from Perma-Liner™ Industries. Keck Plumbing is a certified installer of this no-dig trenchless sewer repair process in Quincy, IL, Springfield, IL and the surrounding tri-state area. We have been providing this sewer repair service since 2013.
Our trenchless pipe lining creates a new, permanent pipe inside the old existing one making your replacement pipe even stronger than your current pipe. There is no digging and no mess for a quick sewer repair solution and is reliable in preventing future problems.
Best Small Diameter Pipeline Rehabilitation System
The Perma-Lateral™ inversion unit does all the work. The installer calibrates the correct inversion pressure while the liner inverts itself through the existing host pipe and the Certified Installer controls the speed to ensure proper installation. Once the liner is inverted and holding pressure, the Installer attaches a special cap to hold pressure during the curing time. The Perma-Lateral™ inversion unit is released and used for the next installation. The liner holding pressure is maintained using a portable air tank.
Benefits & Features of Perma-Lateral™
- 3” to 4” and 4” to 6” Pipe Flow Transitions
- Styrene Free Resin
- Any Pipe Material: Cast, Clay, PVC, etc.
- Minimum Life Span 50-years per ASTM F 1216 Third Party Testing
- UPC Listing (Uniform Plumbing Code)
- ICC-ES PMG Listing
- IRC Listing (International Residential Code)
- IPC Listing (International Plumbing Code)
- IAPMO Classified Marking
- NSF / ANSI Standard 14 Certification and Quality Assurance Program
- Third Party Tested and Certified Environmentally Safe/ Odorless Materials
The Perma-Lateral™ ambient cure resin is formulated to meet the installer’s needs. Perma-Liner™ has formulated its resin for all working temperatures. The Perma-Lateral™ epoxy resin will provide you plenty of working time with a 3 hour cure time. The epoxy is pre-formulated and shipped to you in 5 gallon containers. The formulation is a 2-part mix. You simply measure the quantity of resin needed and introduce it into the liner. There’s no waste of materials. This system is user friendly!